What you think of my OC?

[Antallica]

Here's what I am using right now, stable as (even at 5+ rail @ 4.71v under load hehe :eek: )

Rig: XP 1600+ @ 1.85v (153FSB), Soltek DRV2, TwinMOS 512MB DDR @ 2.7v CAS2, AGP @ 1.7v (GF2 Ti @ 253/507)

45C Idle & 50C Load - not too bad

1st the benches (quality rather crud):

[Antallica]

More........ (yes I have a Soltek DRV2 so those fsb reading are higher than normal)

[Antallica]

"Waits for KJ to diss my OC" ;)

[Humantuckshop]

Originally posted by Antallica
"Waits for KJ to diss my OC" ;)



You don't have to wait for KJ. I'm here. ;) The FSB is @ 153MHz!!! OMFG!! :rolleyes: :rolleyes:


Unlock teh CPU, foo! :p

[Deviant]

Sorry to burst your bubble, but here's mine with the same chip. Still, it just great to get more performance from you chip like you have. It just fun overclocking. Good work cause some of these cpu's are pretty hard to overclock and I think I had to raise the Vcore to 1.95v to do this.

[Antallica]

Ahh I'd like to but I just can't be bothered finding all the materials. If only somebody has the kits then I'd buy right away.

Nice bench. My vcore only goes up to 1.85 though :(. Need to unlock.

[Antallica]

Ohh I've hit 154fsb hehe... just add 120 approx points to all those benches haha man I need to unlock. :D
-------------------------------------------------------------------------------

Hey what's the best way of finding out stability? SSandra Burn in? I just use my Winmodem, go 100% load and play mp3's. That usually sniffed out bad stability in previous oc's.

I must install 3dmark 2001se and run that a few times

[KingJackal]

Originally posted by Antallica
Ohh I've hit 154fsb hehe... just add 120 approx points to all those benches haha man I need to unlock. :D


Hahaha - you sure do, foo!! My pitiful TBird is fine @ 175.... with PC2100 RAM..... d@mn, you're sooo not trying. :p

That's a lame attempt. It'll give you NOTHING. It's not even worth it. I mean - I reckon I could get a good Duron past that. 15X? 15X?? *yawns* Next.....
*sigh*

Hey - you wanted a dissing didn't you? Oh BTW - I take it the flame could consist mostly of utter rubbish ( well - no choice now.... )

[Antallica]

I know it's pathetic... hence the "haha man I need to unlock", I need to get a 400w psu before I can go any higher as my Hyena 300w is real bad (as I have said many many times before)

Still.... I do get good benches :rolleyes: - That's the whole point of these posts

You could have flamed better too hehe... you must be tired :p

[KingJackal]

Originally posted by Antallica
You could have flamed better too hehe... you must be tired :p

Me tired? NEVER - I slept only 35hours ago.... uh..... :o

DUDE, j00 su><0r - my old K6-2 could do better than that. 0wnz j00r @zz0r, mmmkk? FFS - you could4 br0ught a ha1f that pr1ce CPu and g0n3 high3e tan DAT!! Fu><0r!!
HAHAHAHHAHAHAAAA

And j00 say j00r PSU = teh Su><0r? My K6-2z0r had a 200W, and it r000000lz j00!!! Is it teh smok1ng 1?I THINK NOT - s0 it n0t = teh 1338 ( that's 1 MROE tan 1337!! ) 3nuf!! Cos j00 suck monaky b@llz!! BWAHAHAHAHAAA

ALL j00R B4S3 AR3 B3L0NG T0 M3Z0r!!!!

is that any improvement?

[Antallica]

Yep, u take the cake for utter rubbish posting ;).... and you are badly lying about the k6-2 being better, I'd like to see that :D

Anyways, back to being serious. What's the best way of finding stability in oc's KJ?

Cheers

[KingJackal]

I used to have a proggy that tortured CPUs - but it turned out XP's just stare at it and laugh. TBirds almost die though... lol.

Do stupid stuff. For a start, crunch Seti in the background 24/7. After a few weeks you get a good idea.... lol.

Failing that ( or if you don't have a spare few weeks ), I'd just run a few 3DMark/Sandra burn-in/game at an obscurely low res ( 640 is good, hehehe ) etc. If one of them makes your core temp go up - do it more. That sort of treatment normally sorts out the men from the boys.....
;)

[Antallica]

Cheers man :), I'll redownload Seti, argh :( 56k is the death of me. Seeing as I have next week off school as well I'll run that baby under load 24/7. But I'll probably get bored after a day or two and settle for what that results (oh somebody slap me).

[I.R]

hehehehehe 1338 hehehehehehe :p

Oh yeah I still have that CPU stability test prog.... I just use teh SiS Burn test now...... and MO 2001...... it's all about the benchies ;)

[Antallica]

Stupid fact: My AGP voltage works better as 1.6v than it does at 1.7v (now I'd think higher would be better, I am probably wrong though)

*Latest Speed Below* - if 42 Sandra Burn in tests at extreme load isn't a stable oc then I dunno what is. I'll give seti a go later on.

[KingJackal]

Originally posted by Antallica
Well after a little bit of fiddling I get this (attachment). I'll turn off 4-way tomorrow still leaving CAS2 on, that'll gimme a better one hopefully. Still I was not expecting this high an oc, my vid card upgrade really has made my oc'ing better (used to get like 148fsb max on my GF2mx200)

Stupid fact: My AGP voltage works better as 1.6v than it does at 1.7v (now I'd think higher would be better, I am probably wrong though)

4-way interleave won't affect your OC much AT ALL.

CAS2 -> CAS2.5 ( or 3 ) WILL.

BUT 4-way interleave gives a bigger boost ( or did you not read THAT PAGE OF MY RAM GUIDE (http://www.radiativenz.com/guides/memoryguide/index5.shtml) or something? :mad: :mad: )

heh - couldn't resist a good p1mp!
:p

[Antallica]

Well in my earlier attempts to oc a while back I did notice that I had slightly better stability when 4-way was disabled. But as you say yeah not much of a difference.

[Bravo]

Fark, kiddy stuff :p

http://bravo.ausgamers.com/kx7-1/images/2070.jpg
http://bravo.ausgamers.com/kx7-1/images/2070cpu.jpg
http://bravo.ausgamers.com/kx7-1/images/2070multi.jpg
http://bravo.ausgamers.com/kx7-1/images/2070mem.jpg

Got me the 3rd Highest AMD CPU PC Mark with 6309 (http://service.madonion.com/compare?pcm=439128).

10x 207mhz Aggressive settings, 1.95v Vcore, 2.95v DDR. Cyclone 5, Ehiem 1250, Black Ice Extreme.

EDIT:

Forgot, this is an XP1700 AGOIA week 16 '9'. My previous XP (XP1600 AGOIA week 4 '4') did 1920 @ 2.2v.

[Antallica]

Damn nice..... I need to upgrade a hell of a lot of hardware if I wanna go anywhere near that, congrats man :D.

Now.... back to gaming