2.40Ghz D1 @ 3845

[H2gO]

and Before you All start - NO its not mine *shame*

http://www.piopioshardware.com/YAO/AsusP4C800/320-1.gif

can ya feel the bandwidth !!

:p

[Wibber]

:eek:
320mhz!

[dumass]

Wholey scrotum!

[Antallica]

:eek: How the.......

*Bows*

[H2gO]

were's the Tigger around when ya need him

this would bounce his brans out :D

[stevo]

Well Batman I think that would rock in my Vapochill, so lets go get one...:cool:

[H2gO]

just remember Robin

look for SL6WF
Week 09


http://www.piopioshardware.idv.tw/intel/2400C/DSC018671.jpg

:)

[irish-whiskey]

Is that a Canterwood P4 ???

[Walt]

Canterwood = the new chipset which supports the new Northwood with the 800MHz bus.

Don't confuse the two.

And these screenshots are indeed from the new 2.4C (stepping D1). These are reportedly posting 3.6GHz at almost default voltage on air ... VERY impressive, and enough reason to upgrade alone!

[Tiggerz]

I read it the other nite.. nice one huh.. vapour chill tho :)

Didnt know the new CPUs worked on the old boards, thought they would step down to 533..

Next stop 4Ghz :)

[Walt]

Where does it say this is in an old (845PE or E7205) board?

My understanding is that using one in an older board will underclock it ... ie run it at 133/533MHz ... I am thinking of picking up a 2.4C next week to play around with in my 8INXP (until I buy a Abit IC7-G) so I guess I'll find out ... :D

[Tiggerz]

I just looked at the sig and illogically assumed it was correct :)

[bob(nz)]

Hi H2gO

That is some impressive bandwidth for the memory :) It it aint the RAM me wonders where the new bottleneck is :D

Do you know what board this is in??

[Walt]

I just looked at the sig and illogically assumed it was correct

Uh OK ... :)

It's not his ... but early reports suggest all these 2.4C's are good for 1GHz overclocks on air. Seeing is one thing ... ;)

[H2gO]

Originally posted by bob(nz)
Hi H2gO

That is some impressive bandwidth for the memory :) It it aint the RAM me wonders where the new bottleneck is :D

Do you know what board this is in??

He put the system into an ice box of sort, I believe could be an ice-cream freezer, maintained an ambient of 15C, and proceeded

mobo used : Asus P4C800 Deluxe

Pio Pio has more here (http://www.piopioshardware.com/YAO/AsusP4C800/yao20030421.htm)

;)

[Detract]

Hey H2Go, I'll be getting a 2.4c and IC7 soon. Hopefully i'll be able to hit 3GHz unlike my 2.4b. Let me know how yours goes, you should be able to hit some crazy speeds with your Vapo! GL:)

[H2gO]

it would seam there's abit of a race going on here as to who gets there system up & running with the highest overclock spec speed IMHO

I'm up to iT :p

Detract
your chosen combo would appear to be the "best" bang-for-buck IMHO , others may differ

I also note bob(nz) has gone quite on the same topic
*maybe he's already there*

Cheers

points Detract (http://forums.overclockers.co.nz/showthread.php?s=&threadid=6942) to the Abit Motherboard thread

;)

[Detract]

It seams like a good combo value wise, though still high end and room for upgrading. I was within a dog wisker of buying an GA-8knxp but $540 was just to much. Hopefully I'll my stuff this week not sure on the availibility. Keep you posted :p

[reaver]

oh those p4c800 mobos are mint, have to pay nearly 600 bucks for them tho, i think im going to go for the cheaper option of the msi neo 2, which does most of the stuff the p4c800 does at half the price ( just not up to the high asus standard no doubt)
________
vapor genie vaporizer (http://vaporizer.org/reviews/vapor-genie)

[Walt]

Well i got my 2.4C in my sweaty hands right now, but I'm at work :( so I'll have to wait until this evening to try it out on my IC7-G.

[reaver]

ooooooh maybe not in this case...

MSI 875P Neo-FIS2R P4 Motherboard (Canterwood)

This board is marketed with overclockers in mind, aimed and priced at the enthusiast. Even the CoreCell has overclocking features. But with the shipping bios and the latest bios, v1.1 and v1.2 respectively, the overclocking function does not work, on either 533MHz processors or 800MHz processors. I actually had to downgrade my BIOS to v1.0 to get the overclocking to work at all. As it turns out, this was a mistake as MSI never included the Promise BIOS in that online file, hence I cannot boot now from the Promise controller. The CoreCell proved useless in overclocking on both the newer BIOS?s. Another bug is the fact that you cannot specify memory timings in DDR400 mode. The moment you deviate from the SPD settings the memory switches to DDR333 mode. Very, very annoying. The by product of this, is that in-fact DDR333 with good memory timings yielded better performance that detected settings for DDR400.

how suck is that?
________
universal health (http://uhwh.com/)

[Ragnor]

From the all the Canterwood reviews I seen so far all models are exhibiting a few weird bugs etc under certain conditions.. memory timings, FSB hiccups... SATA issues

This time round I vowed to myself that I wouldn't jump on the 1.0 bandwagon and would wait it out for awhile..

Seems to working out alright for me

[stevo]

Originally posted by Ragnor
From the all the Canterwood reviews I seen so far all models are exhibiting a few weird bugs etc under certain conditions.. memory timings, FSB hiccups... SATA issues

This time round I vowed to myself that I wouldn't jump on the 1.0 bandwagon and would wait it out for awhile..

Seems to working out alright for me

Maybe there is nothing wrong with being cautious,however the issues that troubled the IC7 were fixed straight away with a bios revision.I am not aware of any current issues now?
As for the other boards it does not surprise me.
There is only one board ABIT..... or NOTHING;)

[Detract]

Recieved my IC7 and 2.4c from Starlyte today. I must say they have excellent service, considering I ordered on Tuesday night. Cant say much as yet as Im currently having to reinstalling XP again. I'll post some numbers soon as I can.

Later

[H2gO]

noted *Detract is on warm up lap*

;)

[stevo]

Do I detect a change in your signature Mr H2gO? Something like IC7 ? So does this mean you have it already?
Well c'mon out with it man...doya;) :D

[H2gO]

Originally posted by stevo
Do I detect a change in your signature Mr H2gO? Something like IC7 ? So does this mean you have it already?
Well c'mon out with it man...doya;) :D


:D :D :D

M8 - how quick you are indeed !
*well spotted*

Couldn't stand the wait any longer

I'll drive by your house tomorrow night & show you on my way to the VapoRoom

;)

[Sodge]

:eek: Nice..... :D

[bob(nz)]

Originally posted by H2gO
:D :D :D

M8 - how quick you are indeed !
*well spotted*

Couldn't stand the wait any longer

I'll drive by your house tomorrow night & show you on my way to the VapoRoom

;)

H2gO

My board turned up today but I am off overseas for 12 days :( and if I start playing tonight b4 I leave in the morning I will be a dead man :eek: :D

Make sure u are posting some results with that combo soon :) I can still keep track of what is happenin on this side of the world while travelling ;)

[H2gO]

Will do bob(nz)

I've just gota break then news to her indoors
pointing out the added value & features I'll be gainning

I'm off in 3weeks time also ( SARS and all )
3 nites experancing Bangkok this time

*don't tell me - nar, you're not are u*

:)

[stevo]

Originally posted by H2gO
:D :D :D

M8 - how quick you are indeed !
*well spotted*

Couldn't stand the wait any longer

I'll drive by your house tomorrow night & show you on my way to the VapoRoom

;)

Yeah great bring it over tomorrow,I would like to see it, FEEL it,....STEAL it...
There is zero chance of you leaving alive..

I can just picture it running inside my Vapo...

[H2gO]

Blue that for a joke

nice addition to your window there Stevo

are they OCNZ Blue 80mm fans I C their

[stevo]

Originally posted by H2gO
Blue that for a joke

nice addition to your window there Stevo

are they OCNZ Blue 80mm fans I C their

Probably the same thing,but from PCgear

*3 nights in Bangkok* did you say?

Does your wife know about this?:eek:

[Detract]

Hey H2GO, you got the new chip yet? Interested to know:D

If anyones interested I've got some stuff for sale on Trademe

P4 2.4b 533FSB http://trademe.co.nz/structure/auct....asp?id=3988692
ASUS P4PE http://trademe.co.nz/structure/auct....asp?id=3988798
and a P4 2.4c 800FSB http://trademe.co.nz/structure/auct....asp?id=39926

I know it shouldnt be here but I couldn't post in the Buy Sell forum???

Cheers

[H2gO]

Detract

sure have - last Friday in fact

these little gems do pull the 1G plus on Air ( its true )

Question
Why are you sell that 2.4/800 chip ?

:eek:

[krnage]

Hey stevo,

Nice pic of vapo :) are the windows the one Asetek supply with there vapos?

[Detract]

Hey thats awesome H2GO, what are you batch numebers and where did you purchase it from? Congrates on hitting 3.6:D , im now even more willing to hit over 3. :p

[stevo]

Originally posted by krnage
Hey stevo,

Nice pic of vapo :) are the windows the one Asetek supply with there vapos?

Yes this PE version has has factory windows

[Detract]

I think I need something with a higher multiplier. I just cant get enough outta the RAM before the chip max's out. Plus I didn't have much like with mine:( .

[H2gO]

Originally posted by Detract
Hey thats awesome H2GO, what are you batch numebers and where did you purchase it from? Congrates on hitting 3.6:D , im now even more willing to hit over 3. :p

I can't take the full credit on this alone - I'd like to thank the wife for here full support in underwriting the house keeping funds towards this development todate. *on ya Girl*

this little Gem is:

PROD CODE: BX50532PG2400SL6WF

MM#:852314

FPO/BATCH #: L309A586

VERSICN #: C30333-001

PACK DATE 04/04/2003


;)

[Detract]

Ok this is making me so :mad: . I have the exact same details for not one but two 2.4c's. Not one can do anything over 2.9:mad: . I starting to give up:( . I dont understand how there can be such a huge difference H2GO. Im guessing your chips runs a lot cooler in that Vapo? Do you reckon you could slow it down so it would run in the 50's, just for awhile and see if its stable? Im giving mine 1.65 just to post at 2.88 :mad: .

[Detract]

Now this is annoying. At default my 2.4c is running at 56C under Prime95. Thats with stock everything, and a Swiftech MCX 4000 with AS3 which is one of the best air cooling packages available. Im about to rip my hair out:mad: :mad: :mad: .

[H2gO]

if you 'd like confirmation as to the chips "top end"

send it on over & I'll run it in the Classic if ya like

:rolleyes:

What are your system spec's (n detail )
Modo ?
RAM ?
Vcore ?

:(

[Detract]

Well my specs are

Abit IC7
OCZ 512 3500DDR 5:4 ratio with SPD timings. Around 400Mhz
1.65vCore thats the max I wanna go with air.

Sending it you probably wont leave me anywhere, cause I don't intend on buying a Vapo. Thanks for the offer though. What temps is yours running at?

[H2gO]

hey Detract
Sorry I hadn't replied earlier
my day job has incroached on my personal time of late


1.725Vcore Classic results in
Head temp display read out @ -10 to -12 deg C under seti@home load
*now folding@home by the way*
CPU temp about +11.5deg C
System @ 30.0 to 32deg C
Room temp around the 22 deg mark

;)


Edit\
as a footnote
My other rig with P4 2.4 C1 is quite happy @3.2 running on H2O 24/7

[lashton]

Thats nothing ... Tomshardware guide got a 3 GHz P$ upto OVER 4GHZ!
Chech it out at http://www6.tomshardware.com/cpu/20021216/index.html

[tanivula]

ive joinced the p4 2.4C club finally :D

been waitin a while for my mobo to arrive and it did on the weekend. now i see how crazy it is.

i have it running at 3.2 atm but then just tried running toast and noticed my fsb and clock speeds were increasing dramatically :eek:

it hit 3.4 and i was like nah and pulled the plug on toast. now i wonder what more this mischevious board has in store for me.

if ur wondering what it is i am talking about it is a msi 875p neo board.

dynamic overclocking.. its the **** !!!11

[tanivula]

update on my dynamic o/c

systems "stable" at 3.2ghz.

with dynamic oc on it spiked to 3.6

w00t! :D

pity it wouldnt run "stable" at that