A few Q's

[t3ch_d0g]

RAM settings:
burst length - 4 or 8?
que depth - 2/3/4?

also my +5v rail is @ 4.81 (nasty iCute) is this too low? (I am experiencing random reboots:().

cheers guys.

[SilverPriest]

Check out this bios optimization guide for lots of info (http://www.rojakpot.com/Speed_Demonz/New_BIOS_Guide/Index.htm)
ALso, yes, i reckon that is way too low for your 5v rail.
the 3.3v and 5v rail are rather important for the mobo/cpu n everything on the mobo to function properly.
Does your PSU have a couple of pots inside it to change the voltage?

[t3ch_d0g]

Originally posted by SilverPriest

Does your PSU have a couple of pots inside it to change the voltage?

I've never opened it up, was told you could get a shock. Could you tell me more about it?

Thanks

[whetu]

you wont get a shock if you take precautions ;) you can discharge some of the buildup left in the psu and so long as you keep your hands and anything conductive (like a screwdriver) away from the larger caps and the transformer, you'll be fine.

[t3ch_d0g]

All the same whetu I think I'll give it a miss for now;). I'll have to wait till I can afford something better *kicks his iCute*.
Still dont know about those ram timings... anyone? its a soltek DRV2 btw.