PDA

View Full Version : modem power supply


sonic/mini
15-06-2002, 10:40 PM
what size power supply?
the modem has label on the
outside with
this XLINK (GVC) XL-144E
modem may be connected
to the telecom network
PTC 211/94/114

Inside the chip says
rockwell 93
R 6645-20
9421 A53866-2
RC144DPI
MEXICO

ON THE BOARD
TV0IVO
KA1217
93/16
I was given this and if I can make
it go I will fit it to my daughters
computer, there is no power supply
and I don't want to use the wrong one?

FAX/MODEM 14400 BPS

GriffiN
15-06-2002, 11:41 PM
enermax/leadman are the good brands (or are you talkin about power to external modem??? anyway...)
or grab a generic one to save money.
It doesn't really matter what kind - they all do one job.
Just make sure it's a minimum of 300W (will say on side or sales person can help you).

As for the modem - 14400 BPS is just too slow (you'll get very frustrated surfing the net and downloading files). It will pay to grab a new 56k v90 while you're picking up a power supply.

Check out the buy&sell section on here or chuck in a post wanting pieces if you are on a budget - all the guys here are good to deal with :)

(If you already have a net connection then ditch the 14400 and grab how ever many network cards yuh need).

sonic/mini
16-06-2002, 12:16 AM
:) Tah!! If I can find out what size power pack it needs
I will have a complete unit ..
what are good and cheap network cards and where can they be found?
I will be greatfull for all help
sonic/mini

GriffiN
16-06-2002, 12:21 AM
You can get network cards from Dicksmith or any PC store.
styles (http://www.stylespc.com) is a good place - he'll also recommend the best if you arn't sure.

You'll pay between $20-50 each for a Nic.

Sounds like you're running just a basic system - getting a 300W-320W will cover it fine.

Humantuckshop
16-06-2002, 12:37 AM
Originally posted by sonic/mini

this XLINK (GVC) XL-144E




Hmm, the 'E' makes me think it's an External modem.

Therefore you would be wanting the AC/AC power adapter?

SilverPriest
16-06-2002, 12:43 AM
There should be a small hole with a in the side of the modem.
It should have a voltage written next to it.
Like : 9V DC or something.
Then you have to go out and find a powerpack, DSE might have something.
Has to be that exact voltage tho ;)
I might have something in my great box of miscellaneous computer equipment, hehe, depends on what the voltage required is.
This is all assuming it is an external modem.

Artifice
16-06-2002, 01:28 AM
a modem will only work with the proper power supply.
if you just buy a powersupply from a hardware shop that is rated at the same output it wont work.
they need a very specific powerinput you see.

sonic/mini
16-06-2002, 11:15 AM
yep it is an external modem in a black metal case standing on its side in a clip stand , there is no voltage shown either by the power socket or printed on the board.
:) :) :) :)

mird-OC
16-06-2002, 01:27 PM
most external modems use 9V @ 1A power packs... but they often have quite a huge tolerance... i.e. on an old modem of mine rated for 9V i could run it off a 7V powerpack or a 12V powerpack. just make sure it can supply enough (milli)amps (1A/1000mA is ideal) or else the thing will cut out on you.

sonic/mini
16-06-2002, 01:41 PM
Thanks people I knew I had joined a great crew,
Thanks:) :cool: :) :) :D :D :) :) :)

TooMuchCoffeeMan
16-06-2002, 10:54 PM
I have external modems that are both AC and DC, so if it does not work with one, try the other.
Yes, most are 9V (500milliamp to 1amp).

14.4 is a relic, you could use it to send email but web use would be very painful !

perhaps use it for faxing ? :)

sonic/mini
17-06-2002, 02:57 PM
just for email
does anyone know where I can get a power transformerfor my external modem
9v/ 500milliamp
CHEEP!!!
cheers
SONIC/MINI

Humantuckshop
17-06-2002, 03:05 PM
This is what I found: http://www.dse.co.nz/cgi-bin/dse.filereader?3d0d50ce09c3f332273fc0a87f9906e4+EN/catalogs/CTG0000476

Or you can try: www.jaycar.co.nz