Summer temps

[Isotope]

Ouch, my computer not liking the 27°C here in Chch today...

up to 40° with my V9 on almost full. (it's usually about 33°)

Anyone guess at the correlation graph between room temp and core temps? exponential maybe?

[Binky Stunt Cat]

well, mines sitting at 48 degrees while recoding an SG1 ep (btw i have three new ones o.O) and is 21 degrees over the incomming air temp.
This is about standard for me...with a V7+ on low.
But usualy its at about 44 degrees underload.

[Deviant]

At a guess I'd say it was differential, not exponential.

ie when you say 40 and ambient is 27 then that +13 degrees

and in winter it's 33 and ambient is 20 and that is +13 degrees.

And how the bloddy hell do you do the degrees symbol?

[KingJackal]

Lol - laughs at self.

Just saw my core was at 48°, then realised my room temp was about 35° :rolleyes:. Heh,
*opens window*

And yeah, I think Deviant is about right ( well, it's close enough ). I know with my setup I get temps about 14-16° above ambient ( ambient being my room temp, as that's what's near my radiator ), regardless of summer/winter temps.

BTW, Deviant, the ° symbol is gained by hitting:

Alt + 0176

That only works in Windows, and only on the numpad with numlock on though ;).

[Isotope]

I get ° by start>programs>accessories>sys tools> Character Map.

Awesome wee program. All types of character stuff in there...

Ð Щ كككك ₪№Ж ♀ ﺶ

(hope your win installs can see that too...)

cool eh? love the arabic stuff, I wonder how you spell Jihad in it....

[swiftynz]

yea you'll notice in my xp2100+ temps thread that i've also been getting very high temps recently. in fact atm its running at 58 degrees, with the system temp at 20 (case side off).

hence my decision to get wet. :)

hsf is a taisol CGK76002 with AS3 and a TT smartfan 1 @ 3276rpm (max is ~4800rpm, temps drop about 2-3 degrees when i crank the fan speed up).

[ZeuS]

1.4 ghz tbird, currently idling around 39-44C :/, 48C load the other day when my system temp hit 30C+

[KingJackal]

Originally posted by ZeuS
1.4 ghz tbird, currently idling around 39-44C :/, 48C load the other day when my system temp hit 30C+

Yeah.... TBirds be hot beasties, huh?

I suppose you'll be like me - wanting to upgrade to an Athlon XP so your temps go DOWN, heh :D.

[I.R]

meh...... I'm gonna turn up the A/C to get my temps down..... Did I mention I have a beastie A/C in my small room!!! :D

[SilverPriest]

P3 733 @ 32C full load (UD)
Arkua 1U HSF too :D
(Shuttle SV24)

Got the old 1.33ghz tb running, according to the a7n8x it's running @ around 45c idle, 52-55c load (not running UD, too fookin hot until i get wc)
Using wibbers old Pal6035 with a 60mm delta.
Sadly, as i value what's left of my sanity, I've cranked the fan down to 7v or thereabouts, hence the high temps.
With the delta balls out it sits at 45c load.
Yes it's hot in Piha :p

[whetu]

Axia tbird 1.4... currently sitting on 36c seti load, watercooled :cool: I've seen it hit 39...

[swiftynz]

came home today and my comp had locked hard... oops :p

obviously i wont be running UD for a while until i get watercooling set up.

current temp 53° idle. its bloody hot here today tho, case temp with the side off is reading 40°! :eek:

i'm pretty sure this gigabyte board overestimates the temps tho, otherwise somethings seriously wrong and i've checked everything.

(btw thanks KJ for posting the ascii code for ° :))

[mird-OC]

agkga 1700+ @ 1850MHz @ 2.1V (115W baby!) watercooled... ambient temp usually around 25C, with load temp sitting on 40C most of the time these days... hit 50C the other day tho... :eek:

[Method]

haha my case temp hit 40*c today :eek:

Usually my cpu isnt even at 40 but at the moment i dont really care, the only fan on my case is the psu extraction fan lol.

[2 much thinking]

Originally posted by mird-OC
agkga 1700+ @ 1850MHz @ 2.1V (115W baby!) watercooled... ambient temp usually around 25C, with load temp sitting on 40C most of the time these days... hit 50C the other day tho... :eek:

ooo how long have u been running at 2.1V?? Ive got the same stepping XP1700+ as u, guess my Ram is holding me back (only got it to 1672 Mhz so far). Must get me some 2700 Ram for my KX7, its a pity it'l only let me go to 1.85V tho :( :p

I think its just not possible to make a graph unless you have controlled atmospheric conditions. Too many variables to take into account when its just sitting somewhere in your house.

[dairyboy]

my tbird @ 1.4gig got up to 48° under load yesterday:eek: , im not in chch but it was fricken hot here!
my system temps were reading about 29°

[Method]

lol the weather is real funny, snow to 300 meters in the bottom of the south isl and mid summer has _passed_, and in switserland (where i was born and all my rellies live) they have no snow :0 its snow to 3k meter there. (if you dont know where switzerland is its in the middle of europe, its kindo in the mountinas areas.


All i can say is ,maby the northen hemisphere is getting global warming and the sothern is falling in to a ice age hehe

[Deviant]

Originally posted by Method
lol the weather is real funny, snow to 300 meters in the bottom of the south isl and mid summer has _passed_, and in switserland (where i was born and all my rellies live) they have no snow :0 its snow to 3k meter there. (if you dont know where switzerland is its in the middle of europe, its kindo in the mountinas areas.


All i can say is ,maby the northen hemisphere is getting global warming and the sothern is falling in to a ice age hehe

Official summer doesn't start till December as far as I know, so we aren't even a 1/3 through Summer yet.

But yeh, isn't there still skiing on Ruapahue till early in the new year?

[Jiriteach]

mines pushing itself ..
on my machine its running at 36 / 37 deg on a hot day in palmy with max getting up to about 39

at the moment its at 35 but its a very muggy day

[Geek4Life]

Well I'm sitting at 38/31 at the moment with my V7+ on median.

Which is lower than it usually is. If I drop it down to low it'll go back up to ~46ºc though.

[Wibber]

62/50 I'd say my GA in socket probe gives high temps to compensate how innaccurate in socket probes are

[Method]

Originally posted by Deviant
Official summer doesn't start till December as far as I know, so we aren't even a 1/3 through Summer yet.

But yeh, isn't there still skiing on Ruapahue till early in the new year?

Yeah were not half way thru but the longest days past..

Snow on the milford roard too, 4 cm of it.

[dnar]

XP1700+ @ 1700 (200x8.5) @ 1.9V with an SLK-800 and PAPST 80mm fan, running 24x7 100% load, peaks out at 48c (around 22c above room temp).

Nice and quiet, the SLK-800 is a kick arse cooler!

[Deviant]

Originally posted by dnar
XP1700+ @ 1700 (200x8.5) @ 1.9V with an SLK-800 and PAPST 80mm fan, running 24x7 100% load, peaks out at 48c (around 22c above room temp).

Nice and quiet, the SLK-800 is a kick arse cooler!

You must be running air-con for that room temp in aussie. I think you need some more efficiency on that HSF. A delta of 22º is too high. You need to get it down by 4-6º. Have you lapped that HSF? Are you using Artic Silver or anything?

[mird-OC]

a delta of 22C is actually pretty realistic for an aircooler, IMO. anyone claiming a delta of much less than 20C on air is living in la-la land.

[SilverPriest]

And summer just hit Piha today.....
61C idle :(
10x140.......

[Jiriteach]

ooo now thats definetly getting up there.
that really cant be very healthy :)

[Buster]

So how are our temperatures going?

My 1800 XP @ 2000 XP (Watercooled) has gone from mid 30's to mid/high 40's. Radiator fans still on 5 volts.

Made myself a waterblock for the Triplex GF4 Ti 4200 - 3.3ns. Copper/perspex combination. Hans review says it all - good vid card with a rubbish cooling solution (it isn't a solution).

The Thermal paste application was very poor (nonexistant in places) and the fan is noisy. I chose this card (performance/price) knowing this and intending to watercool it.

Anyway measuring at the back of the chip my homemade effort dropped the temperature by 15 degrees. Currently running in the high 40's.

[[H]arls]

XP 1800+ currently non-overclocked, temps running at 43°C at the moment.
It was pushing 55°C this afternoon. Im now running with no sides on the case, and all fans on full throttle.
And then to top it off it pissed down with rain about 20 minutes ago, its like a freaking sauna in here and it aint pleasant. :rolleyes:

I really have to get my rig wet.

[Sydog]

My 1700 (1433 oced to 1650mhz) is currently at 44deg with fans on a low something slow. By adjusting my papst fans abit I can get down to less than 40 with little change in noise :p

[Volodkovich]

XP2400+ @ stock, on stock cooler running 37deg C here. System temps are 24 deg C. Seems quite low compared to what you guys are getting...

[DiscoStu]

It might pay for all those of you claiming sub 40C temps on air (without delta loving) to try an on-die measurement.

[Volodkovich]

yah, my senfu temp sensors are on there way...:)

[Wibber]

I dropped my xp 1800 from 1800mhz 1.9v down to 1715mhz @ 1.8v, idles @ 55, load at 60-2 , damn i need a tholobled

[SecretSquirrel]

Well...

My temps are high, but they according to the motherboard, they are on die temps...

Idle of 56-58 dependant on the days temp of course, plus this house is MUCHO hot all the damn time!! And I get 60-62 load.

Not worried a bit, its running nice at 1812MHz and stable as your mother, the temps are probably closer to 45 load really...

[Blitzkrieg]

To calculate what to expect for other CPUs, for every watt the CPU radiates, the heatsink will cool the core by the (C/W x watts) plus ambient temp. For example, at a fan inlet temp of 25 C, a C/W of 0.25 with a CPU radiating 50 watts means that the CPU temp will be 50 x 0.25 = 12.5 C over ambient temp, or 37.5 C
(from www.overclockers.com)
SandraSisoft should show you your rated Core Power
Your mobo temp
Your CPU temp
and your C/W
Working out what to expect with certain case temperatures you should be able to approximately work out from there its not very hard
I have a Case temp of 35-37 degrees mostly and the Duron at 1.4-1.45ghz doesnt exceed 48degrees. But im a newb what do i know.....

[fatsanchez]

*shrugs*

i dont run any temp monitoring, so summer dosent worry me :D

[MadMax]

My 1.8A @ 2.25 @ 1.7 sits at 44 full-load in the afternoons when the sun is hitting the room and making it about 28 degrees inside.

Not looking forward to the 40+ days when I'm back in Adelaide in just over a months time :(

[mird-OC]

Originally posted by Blitzkrieg
yada yada yada
you might find this (http://newstuff.orcon.net.nz/wCalc.html) useful... :)

[Binky Stunt Cat]

hey, thats cool!
Maybe you could do a reverse of that, to find out how much your cpu temp sensor is off by..

[Wolfy]

about 37 now And I'm pretty sure its reading it off the die.

[Blitzkrieg]

I dont need that page
As I said the info sandra provides is all you need
and the equation is so simple it takes a matter of seconds to work it out in your head. I dont need a page to do such simple mathematics for me, dont know about others........


example

C/W in sandra = .4
ambient air temp increases 5 degrees
therefore u should get a 2 degrees increase in temp
tho it isnt perfectly linear(obviously)
struggle to do .4x5 in your head?
for those that dont have sandra or have sandra but no motherboard temp, gutted for you.

[Deviant]

Originally posted by Blitzkrieg
But im a newb what do i know.....

Noobs have taught me thing or two before, and I was once a noob and taught others things.

You can usually tell if a noob has a clue at what he is talking about.

If I went to another forum, I would be a noob, but it doesn't mean I know any less.

Some people are still noobs, even though they may have over 1000 posts.

Treat all noobs as a moderator until they prove you different, after all they may be a moderator on another forum.

[DansteR]

49° cpu, 27° case idil

in the midle of winter i once got down to 37° and 17° idil :D

(this is in auckers)

[Antallica]

1600+ @ 1900+ 38C Idle - 42C Load @ 1.8v
Winter I got down to 27C Idle.

Damn it's humid here :(

[must kill Dell adguy]

What models are your fans???
Sounds like I might be needing some of those too:
My palomino XP2000+ @ 12.5x152.
It is quite stable, but the temperature in CHCH at the moment is like 15 degrees, it's so bloody cold.
So I'm currently happy with my CPU at 51degrees, and my northbridge at 27degrees.
But just a couple of days ago, ambient temperature was about 26 degrees, and my CPU was going at 53 NOT occlocked, although my northbridge was at 20degrees.

[mird-OC]

i did a bit of tuning to my watercooling setup on the weekend... and in conjunction with the current cool temperatures my CPU load temp is currently sitting on 31ºC!

first thing this morning (after a night of crunching UD) it was 27ºC!

heheh... :D

[dice]

After my laptop has been on for five minutes, it is too hot to have it on my lap... if I am in my bed I have to have a pillow underneath it, and even then it is uncomfortable...

[Iblis]

Originally posted by must kill Dell adguy
What models are your fans???
Sounds like I might be needing some of those too:
My palomino XP2000+ @ 12.5x152.
It is quite stable, but the temperature in CHCH at the moment is like 15 degrees, it's so bloody cold.
So I'm currently happy with my CPU at 51degrees, and my northbridge at 27degrees.
But just a couple of days ago, ambient temperature was about 26 degrees, and my CPU was going at 53 NOT occlocked, although my northbridge was at 20degrees.
WOW! :eek:
you can get your 2000+ up to 152 w/o changing the multiplier!
What's your sys. specs?!?!?!?

[SecretSquirrel]

Thats not unusual...mine was at 148 stable without unlocking it...

Now its at 12 x 150 so I can keep my little RAM happy at cas2 2-2-2

[Iblis]

44 Idle
48 Load
Thermalright SK-6 w/loud-ass Delta
& 4x80mm case fans

So how are you guys getting your northbridge temps?

[SilverPriest]

Northbridge is sitting @ ~36C with little to no airflow over it.
Thankyou Mr passively cooled nForce2 :D

[Method]

i get 43*C under load and my fans on low and my water temp is 35*C

when my fans are on high i can pull it down to 40*C underload with the water temp down to 29 *C

All my reading have been conducted when the ambient air temp is 25*c


My readings are coming via thermal probe that is touching the side of the core so the reading should be real accurate

/edit my temps changed because i upped my vcore by 0.025 and ocd my xp1800 to xp2100 speeds

i noticed the higher vcore stabilises my whole system alot, i sometimes got randome lock ups even tho i could run sisoft sandras burn in test for 1:30 hrs

[Method]

Originally posted by Deviant

Some people are still noobs, even though they may have over 1000 posts.

^_^

[Method]

I tightend the ice creem container seal that doesnt quite fit between the fan and dad and fu*k me my temps dropped.

With my fans on full and the ambiant air temp at 24*C i managed to get the cpu temp down to 36*c and the water temp down to the high 25's to the 26's (*C)

with the fans on low the cpu temp gets upto 40*C under load the temp probe flicks between 39.6 and 40 and my water temps get to 30*C

Quite a nice diff with just a few changes eh?

i mesurd my nb temp and it is 46~47*c it gets hotter than this because i can keep my fingers on it atm.

[Antallica]

Currently:

CPU - 40C @ 1.8v (V7+ on med)
Case: 25C
Room - 26C (bloody hot in here :( )
HDD: 31C
Finger 35C (I was bored ;) )

[Deviant]

Originally posted by Antallica
Currently:

Finger 35C (I was bored ;) )

Rectal Thermometer?

[Antallica]

Originally posted by Deviant
Rectal Thermometer?

You wish ;)

[Method]

37.1 *C

:)

[Hans]

Originally posted by SilverPriest
Northbridge is sitting @ ~36C with little to no airflow over it.
Thankyou Mr passively cooled nForce2 :D

What sort of FSB are you running? Coz my nF2 heated up a bit around 190 MHz. (Zalman NB cooling)

[Volodkovich]

well now im getting 40deg C full load on this 2400+ @ stock with a v9 on Full. Thats with the crap white thermal paste you get with them. That is measured with my senfu temp probe aswell. The funny thing is my onboard cpu sensor on the mobo is about 5 deg C off. I thought it was weird when my cpu was at 27deg C idle...:)

[Gh0s7 L3mUr]

I'm on 45° in BIOS with my p4 2GHz at 2.66

I don't know how "on to it" the onboard probe is but I'm going to lap the hsf anyway.

[NTBlowz]

I got 38C idle on my AXP1600+ with HHC-L61 HSF

[_N_]

idle, what's that, :confused:
I crunch 100% of the time, :D

my temps, case 31, Duron 1.3 @ 1.47GHz 49°C, HDD 29°C,
and my room is bloody hot at 27°C, it gets all the sun in the afternoon so it gets real real hot.

[MoxPearl]

28 here today

one of my computers (p4 1.7)Just started beeping and it was like 68 D:! D:! D:!

AMDS at like 45 or so at the moment

yay its suppose to be 29-30 here tommorow :/