Figures Please [Archive] - Overclockers NZ Forums

Elle T

06-06-2002, 06:57 PM

For all of those who have bought a Ti4200 64 or 128mb of any brand what are your cards OC'n to?

MrThc

06-06-2002, 07:04 PM

I had a 64Mb Gainward Ti4200, it oc'd to 300\575 fine.. I didn't try any higher, and I dont have the card now, so I dunno what the max is that it will do

Viper_NZ

06-06-2002, 09:23 PM

No idea what mine goes to I'm afraid.. Had a quick go but realised there is nothing play ATM that isn't super smooth.. So didn't bother

Agent 86

06-06-2002, 10:07 PM

I got a 64Mb Gainward Ti4200, did a few 3dmark benchmarks 300\560 no problems.

Gh0s7 L3mUr

06-06-2002, 10:33 PM

SySteM is just waiting on his PixelIce (Damn that's a cool name):D
before he OCs his Gainward 4200. I'm sure he'll post results when alls done.
At the moment he is using ghetto fan attached to ghetto persplex attached to slot holder in the space below his card... hehehe

asanthadenz

07-06-2002, 01:04 AM

Originally posted by Viper_NZ
No idea what mine goes to I'm afraid.. Had a quick go but realised there is nothing play ATM that isn't super smooth.. So didn't bother

good call mate, dont see the point of Ocing such an expensive card when all your games already run smooth enough :D

SecretSquirrel

07-06-2002, 01:18 AM

Hmm...as I stated before, my friend has the Leadtek 64mb one, with 4ns RAM on it...but then again, it has a MASSIVE heatsink on it, with reacharound technology.

His card is stable at 295/620
At 300 it crashes after a few minutes in GTA3, and similarly, at 630 he gets some blue artifacts, and then freezes.

But still, thats a fair bit of overclocking...I'd love to see someone thrash the Gainward, I'd assume with the faster RAM, some better speeds than that, but all I see is 575-580??

Odd.

ZeuS

10-06-2002, 04:36 PM

I have a 64mb Gainward Ti4200, 3.8ns

Stock core heatsink I can run 3dm2k1 at 330 core (GTU) and around 560 mem.

http://service.madonion.com/compare?2k1=3650081

I've modded a little, removed and reaplied the heatsink and used ASII instead of the stock goop.

Used my GF2 GTS's ram heatsinks on the back of my GF4's card, also hacked up another heatsink to make some ramsinks for the front of the card.

Screwed a 80mm fan onto the back ramsinks to cool the back of the core.

Haven't really tested its new stable/non artifacting limits, I would really love to slap a descent cpu HS&F on the core, but I need some apoxy :/